This sill pin works for some carbon sweep wings as well as older style aluminum sweep wings. Ple...
This sill pin works for some carbon sweep wings as well as older style aluminum sweep wings. Please check the number on the hidden side of your pin before ordering. The number correlates with the milled angle on the pin mounting hole. *For any other number than 2, please call. #2 through #12 are available.
1/2" Sculling Pin - Aluminum - Slotted Sill, C...
Note: This assembly is made to order This Assembly Contains: 1/2" Diameter Pin, Spacers, 1/4" Fix...
Note: This assembly is made to order This Assembly Contains: 1/2" Diameter Pin, Spacers, 1/4" Fixed Aluminum Pin Spacer, Hardware, C2 Oarlock, and Pitch Bushings.
1/2" Sculling Pin For Aluminum Sculling Wing - ...
Includes Hardware and 1/4" Fixed Aluminum Pin Spacer.
Includes Hardware and 1/4" Fixed Aluminum Pin Spacer.
1/2" Sweep Pin For Aluminum Sweep Wing - Slott...
Note: This assembly is made to order This Assembly Includes: 1/2" Diameter Pin, Spacers, Hardwar...
Note: This assembly is made to order This Assembly Includes: 1/2" Diameter Pin, Spacers, Hardware, C2 Oarlock, and 4/4 Pitch Bushings.
1/2" Sweep Pin For G5/G6 Carbon Wing - Adjustab...
Note: This assembly is made to order This Assembly Contains: 1/2" Diameter Pin, Spacers, Hardwa...
Note: This assembly is made to order This Assembly Contains: 1/2" Diameter Pin, Spacers, Hardware, C2 Oarlock, and 4/4 Pitch Bushings. This product is designed for use with any G5 and G6 Carbon Wing using the Sill Pin technology.
1/2" Sweep Pin For G5/G6 Carbon Wing - Adjustab...
This product is designed for use with any G5 and G6 Carbon Wing using the Sill Pin technology.
This product is designed for use with any G5 and G6 Carbon Wing using the Sill Pin technology.
1/2" Sweep Pin For G6/G7 Carbon Wing - Slotted...
Note: This assembly is made to order This Assembly Contains: 1/2" Diameter Pin, Spacers, Hardwa...
Note: This assembly is made to order This Assembly Contains: 1/2" Diameter Pin, Spacers, Hardware, C2 Oarlock, and 4/4 Pitch Bushings. This product is designed for the G7 Carbon Wing, however some G6 wings have been outfitted with the Slotted Sill insert to make them compatible with this Pin assembly.
1/2" Sweep Pin For G6/G7 Carbon Wing - Slotted...
This product is designed for the G7 Carbon Wing, however some G6 wings have been outfitted with t...
This product is designed for the G7 Carbon Wing, however some G6 wings have been outfitted with the Slotted Sill insert to make them compatible with this Pin.
1/2" Sweep Pin For G8 Carbon Wing - Complete (x...
Note: This assembly is made to order This Assembly Contains: 1/2" Diameter Pin, Spacers, Hardwa...
Note: This assembly is made to order This Assembly Contains: 1/2" Diameter Pin, Spacers, Hardware, C2 Oarlock, and 4/4 Pitch Bushings.
1/4" Height Clip On Spacer (for 1/2" sweep/scul...
Used on all sweep wings and current "Slotted Sill" aluminum sculling wings
Used on all sweep wings and current "Slotted Sill" aluminum sculling wings
1/4" Height Clip On Spacer (For 7/16" Sculling ...
Used on carbon sculling wings and older aluminum sculling wings with an "Angled Sill" type pin mo...
Used on carbon sculling wings and older aluminum sculling wings with an "Angled Sill" type pin mount.
7/16" Sculling Pin for Aluminum Sculling Wing -...
NOTE: This product is not compatible with current aluminum sculling wing design. Offered only to...
NOTE: This product is not compatible with current aluminum sculling wing design. Offered only to replace legacy parts on used boats. Includes Hardware.
7/16" Sculling Pin For Aluminum Wing - Angled ...
Note: This assembly is made to order. This product is not compatible with current aluminum scull...
Note: This assembly is made to order. This product is not compatible with current aluminum sculling wing design. Offered only to replace legacy parts on used boats. This Assembly Contains: 7/16" Diameter Pin, Spacers, Hardware, C2 Oarlock, and 4/4 Pitch Bushings.
7/16" Sculling Pin For Carbon Sculling Wing - A...
Note: This assembly is made to order This Assembly Contains: 7/16" Diameter Pin, Spacers, Hardwa...
Note: This assembly is made to order This Assembly Contains: 7/16" Diameter Pin, Spacers, Hardware, C2 Oarlock, and 4/4 Pitch Bushings.
Comes in 3 separate heights. Contact us if you don't have riggers being replaced that are stamped...
Comes in 3 separate heights. Contact us if you don't have riggers being replaced that are stamped with info(#2, #2.5, #3) on bottom of wing mount.
Designed for stainless steel side mount riggers.
Designed for stainless steel side mount riggers.
Bowbrace Short Tube, Flat - Long (7")
Standard Bowbrace tube piece for most hulls: MV8 all seats, WV8 & BV8 2-8 seat, K4+/K45+/K5+ ...
Standard Bowbrace tube piece for most hulls: MV8 all seats, WV8 & BV8 2-8 seat, K4+/K45+/K5+ all seats, K4-/K5- (Sweep) all seats, K2/J2/B2 all seats, K1x both sides
Bowbrace, Complete (3 pieces) - Sweep
Note: This assembly is made to order This Assembly Contains: Long Tube, Short Tube, Locknuts (Pa...
Note: This assembly is made to order This Assembly Contains: Long Tube, Short Tube, Locknuts (Pair, L/R), Threaded Adjuster Please remember to select port/starboard as well as the type of short tube you will need. If you have any questions, do not hesitate to contact us for assistance. If you are replacing a side mounted rigger, those parts are out of regular circulation and would require an extra step in manufacturing. Please note as such in the order notes or contact us to find what you ...
C2 Pitch Bushing Tree, Sculling
*two different pin diameter sizes, differentiated by pitch bushing color* 7/16" - White 1/2" - B...
*two different pin diameter sizes, differentiated by pitch bushing color* 7/16" - White 1/2" - Black
C2 Sculling Oarlock (Includes Pitch Bushings)
*two different pin sizes, differentiated by pitch bushing color* 7/16" - White 1/2" - Black
*two different pin sizes, differentiated by pitch bushing color* 7/16" - White 1/2" - Black
Note: this type of sculling wing does use bowbraces to support the Adjustable Sill pin mounting s...
Note: this type of sculling wing does use bowbraces to support the Adjustable Sill pin mounting system. For Singles, use 7" flat tubes. For Doubles and Quads use 5" flat tubes.
Fixed Pin Spacer (Aluminum, 1/4")
Note: Not intended for use within the length of the oarlock's adjustable zone. Used to affix the ...
Note: Not intended for use within the length of the oarlock's adjustable zone. Used to affix the pin to the sill at a desired height.
