1/2" Sculling Pin - Aluminum - Slotted Sill, C...
Note: This assembly is made to order This Assembly Contains: 1/2" Diameter Pin, Spacers, 1/4" Fix...
Note: This assembly is made to order This Assembly Contains: 1/2" Diameter Pin, Spacers, 1/4" Fixed Aluminum Pin Spacer, Hardware, C2 Oarlock, and Pitch Bushings.
1/2" Sweep Pin For Aluminum Sweep Wing - Slott...
Note: This assembly is made to order This Assembly Includes: 1/2" Diameter Pin, Spacers, Hardwar...
Note: This assembly is made to order This Assembly Includes: 1/2" Diameter Pin, Spacers, Hardware, C2 Oarlock, and 4/4 Pitch Bushings.
1/2" Sweep Pin For G5/G6 Carbon Wing - Adjustab...
Note: This assembly is made to order This Assembly Contains: 1/2" Diameter Pin, Spacers, Hardwa...
Note: This assembly is made to order This Assembly Contains: 1/2" Diameter Pin, Spacers, Hardware, C2 Oarlock, and 4/4 Pitch Bushings. This product is designed for use with any G5 and G6 Carbon Wing using the Sill Pin technology.
1/2" Sweep Pin For G6/G7 Carbon Wing - Slotted...
Note: This assembly is made to order This Assembly Contains: 1/2" Diameter Pin, Spacers, Hardwa...
Note: This assembly is made to order This Assembly Contains: 1/2" Diameter Pin, Spacers, Hardware, C2 Oarlock, and 4/4 Pitch Bushings. This product is designed for the G7 Carbon Wing, however some G6 wings have been outfitted with the Slotted Sill insert to make them compatible with this Pin assembly.
1/2" Sweep Pin For G8 Carbon Wing - Complete (x...
Note: This assembly is made to order This Assembly Contains: 1/2" Diameter Pin, Spacers, Hardwa...
Note: This assembly is made to order This Assembly Contains: 1/2" Diameter Pin, Spacers, Hardware, C2 Oarlock, and 4/4 Pitch Bushings.
7/16" Sculling Pin For Aluminum Wing - Angled ...
Note: This assembly is made to order. This product is not compatible with current aluminum scull...
Note: This assembly is made to order. This product is not compatible with current aluminum sculling wing design. Offered only to replace legacy parts on used boats. This Assembly Contains: 7/16" Diameter Pin, Spacers, Hardware, C2 Oarlock, and 4/4 Pitch Bushings.
7/16" Sculling Pin For Carbon Sculling Wing - A...
Note: This assembly is made to order This Assembly Contains: 7/16" Diameter Pin, Spacers, Hardwa...
Note: This assembly is made to order This Assembly Contains: 7/16" Diameter Pin, Spacers, Hardware, C2 Oarlock, and 4/4 Pitch Bushings.
BACKORDERED Steering Sandals, on Steering Shoep...
Note: This assembly is made to order Please specify Small (Men's 7-10) or Large (11-15) Refer to ...
Note: This assembly is made to order Please specify Small (Men's 7-10) or Large (11-15) Refer to Pocock Sandals listing for most up-to-date inventory on available sizes. Do not hesitate to contact us for help with the custom order. This Assembly Contains: Pocock Sandals (w/ Steering Screw Adjustment), Steering Shoeplate, Steering Toe Piece (w/Thumb Screw), Cable Housing (Pigtail, Pair), Shoe Mounting Screws (Complete Set)
BACKORDERED Steering Shoes, on Steering Shoeplate
Note: This assembly is made to order Please specify size, Men's 8-15. Refer to Pocock Rowing Shoe...
Note: This assembly is made to order Please specify size, Men's 8-15. Refer to Pocock Rowing Shoes listing for most up-to-date inventory on available sizes. Do not hesitate to contact us for help with the custom order.
Bowbrace, Complete (3 pieces) - Sweep
Note: This assembly is made to order This Assembly Contains: Long Tube, Short Tube, Locknuts (Pa...
Note: This assembly is made to order This Assembly Contains: Long Tube, Short Tube, Locknuts (Pair, L/R), Threaded Adjuster Please remember to select port/starboard as well as the type of short tube you will need. If you have any questions, do not hesitate to contact us for assistance. If you are replacing a side mounted rigger, those parts are out of regular circulation and would require an extra step in manufacturing. Please note as such in the order notes or contact us to find what you ...
Footstretcher, Complete (Flat)
Most boats use a small footboard. Hulls listed as follows use the larger footboard: BK5/CK5 (Larg...
Most boats use a small footboard. Hulls listed as follows use the larger footboard: BK5/CK5 (Large hull 4's), BV8(Medium V8), MV8 (Large V8) 1x's Require specially formed footboards, so please include serial number of your hull when ordering. Note: This assembly is made to order This Assembly Contains: Toebar, 2x Tube End, Flat Footboard*, Heel Bracket, 3x T-Bolt, 2x Wing Nut, Center Pin Handle, Toebar/Heel Bracket Hardware (Complete Set), Shoeplate Hardware(Complete Set) *Can include Steerin...
Footstretcher, Complete (Hyperdrive)
Note: This assembly is made to order This Assembly Contains: Toebar, 2x Tube End, Hyperdrive Foo...
Note: This assembly is made to order This Assembly Contains: Toebar, 2x Tube End, Hyperdrive Footboard, Hyperdrive Heel Bracket, 3x T-Bolt, 2x Wing Nut, Center Pin Handle, Toebar/Heel Bracket Hardware (Complete Set), Shoeplate Hardware(Complete Set)
G5 Carbon Sweep Wing (Complete)
Note: This assembly is made to order This Assembly Contains: G5 Wing Rigger, 1/2" Pin (w/ hardwa...
Note: This assembly is made to order This Assembly Contains: G5 Wing Rigger, 1/2" Pin (w/ hardware), Sill Pin (w/ hardware), 1/4" Clip On Spacers, C2 Oarlock, Bowbrace (Complete)
G6 Carbon Sweep Wing (Complete)
Note: This assembly is made to order This Assembly Contains: G6 Wing Rigger, 1/2" Pin (w/ hardwa...
Note: This assembly is made to order This Assembly Contains: G6 Wing Rigger, 1/2" Pin (w/ hardware), Sill Pin (w/ hardware), 1/4" Clip On Spacers, C2 Oarlock, Bowbrace (Complete) ~Upon request, Rigger can be outfit with the Slotted Sill mounting piece and G6/G7 Pin.~
G7 Carbon Sweep Wing (Complete)
Note: This assembly is made to order This Assembly Contains: G7 Wing Rigger, 1/2" Pin (w/ hardwar...
Note: This assembly is made to order This Assembly Contains: G7 Wing Rigger, 1/2" Pin (w/ hardware), Sill Pin (w/ hardware), 1/4" Clip On Spacers, C2 Oarlock, Bowbrace (Complete)
G8 Carbon Sweep Wing (Complete)
Note: This assembly is made to order This Assembly Contains: G8 Wing Rigger, 1/2" Pin (w/ hardwar...
Note: This assembly is made to order This Assembly Contains: G8 Wing Rigger, 1/2" Pin (w/ hardware), Pin Cup (w/ hardware), Spread Adjuster Block (w/ hardware), 1/4" Clip On Spacers, C2 Oarlock Product is currently only compatible with the xVIII Small hull (Requires bow-mounted holes drilled in the gunwale).
1 – 16 product(s) of 16
