Material: Carbon Fiber, High-Density Foam Size options relate to certain intended hull sizes. L...
Material: Carbon Fiber, High-Density Foam Size options relate to certain intended hull sizes. Large footboards are designed to work with Large 4's(coxed and straight). Small footboards should fit with all other 2-/x's and 4-/+/x's. Please contact us if you have questions or concerns with finding the right parts for your boat.
Steering Line, White Nylon (one length)
Precut lengths are indicated in length variant drop down menu. For older hulls, size up to ensu...
Precut lengths are indicated in length variant drop down menu. For older hulls, size up to ensure there is some slack: E8 - 135" E82+ - 130" M8+ - 200" (Special Order Only, Please Call In For Assistance) C8+, Stud Rudder - 137" C8+, Harvard Rudder - 200" (Special Order Only, Please Call In For Assistance)
Does not include hardware or pulley mounting clasp (Standard). If you need to replace your entire...
Does not include hardware or pulley mounting clasp (Standard). If you need to replace your entire steering pulley setup, please call in and talk to a representative.
Steering Sandals, on Steering Shoeplate
Note: This assembly is made to order Please specify Small (Men's 7-10) or Large (11-15) Refer to ...
Note: This assembly is made to order Please specify Small (Men's 7-10) or Large (11-15) Refer to Pocock Sandals listing for most up-to-date inventory on available sizes. Do not hesitate to contact us for help with the custom order. This Assembly Contains: Pocock Sandals (w/ Steering Screw Adjustment), Steering Shoeplate, Steering Toe Piece (w/Thumb Screw), Cable Housing (Pigtail, Pair), Shoe Mounting Screws (Complete Set)
Material: Anodized Aluminum Currently works best for Domestic screw pattern shoes, with the right...
Material: Anodized Aluminum Currently works best for Domestic screw pattern shoes, with the right shoe needing custom adjustment to accommodate pivot feature. Right hand shoe can still be installed normally using the two additional holes.
Steering Shoes, on Steering Shoeplate
Note: This assembly is made to order Please specify size, Men's 8-15. Refer to Pocock Rowing Shoe...
Note: This assembly is made to order Please specify size, Men's 8-15. Refer to Pocock Rowing Shoes listing for most up-to-date inventory on available sizes. Do not hesitate to contact us for help with the custom order.
T-Bolts come in two lengths: 1 1/4" & 2" (2" T-Bolts are needed for older xVIII footstretcher...
T-Bolts come in two lengths: 1 1/4" & 2" (2" T-Bolts are needed for older xVIII footstretchers) Please specify which you'd like in the selector
Bolt, Washer, Nyloc Nut
Bolt, Washer, Nyloc Nut
Track Stop, single, with rivet
Universal installation. Works for both Port and Starboard / Bow and Stern sides.
Universal installation. Works for both Port and Starboard / Bow and Stern sides.
M6 x 20 Phillips Pan MS, 1/4" Flat-washer, 1/4" Lock-washer
M6 x 20 Phillips Pan MS, 1/4" Flat-washer, 1/4" Lock-washer
Wing Rigger Bag, xVIII Large (Fits Two Wings)
Only compatible with the 24" G7 carbon wings. (Large xVIII)
Only compatible with the 24" G7 carbon wings. (Large xVIII)
Wing Rigger Bag, xVIII Small (Fits Four Bow-Mou...
Only compatible with the G8 bow-mount carbon wings. (Small xVIII)
Only compatible with the G8 bow-mount carbon wings. (Small xVIII)
xVIII Heel Bracket (Pre March 2021)
The xVIII footstretcher has undergone some changes since the model was released. The pictured Hee...
The xVIII footstretcher has undergone some changes since the model was released. The pictured Heel Bracket is intended for an older design before March of 2021 when the adjustable, fully carbon fiber footstretcher was deployed into all new xVIII's.
Carbon Yoke works with old and current rudder post design Aluminum Yoke requires current rudder post
Carbon Yoke works with old and current rudder post design Aluminum Yoke requires current rudder post
