This sill pin works for some carbon sweep wings as well as older style aluminum sweep wings. Ple...
This sill pin works for some carbon sweep wings as well as older style aluminum sweep wings. Please check the number on the hidden side of your pin before ordering. The number correlates with the milled angle on the pin mounting hole. *For any other number than 2, please call. #2 through #12 are available.
1/2" Sculling Pin - Aluminum - Slotted Sill, C...
Note: This assembly is made to order This Assembly Contains: 1/2" Diameter Pin, Spacers, 1/4" Fix...
Note: This assembly is made to order This Assembly Contains: 1/2" Diameter Pin, Spacers, 1/4" Fixed Aluminum Pin Spacer, Hardware, C2 Oarlock, and Pitch Bushings.
1/2" Sculling Pin For Aluminum Sculling Wing - ...
Includes Hardware and 1/4" Fixed Aluminum Pin Spacer.
Includes Hardware and 1/4" Fixed Aluminum Pin Spacer.
1/2" Sweep Pin For Aluminum Sweep Wing - Slott...
Note: This assembly is made to order This Assembly Includes: 1/2" Diameter Pin, Spacers, Hardwar...
Note: This assembly is made to order This Assembly Includes: 1/2" Diameter Pin, Spacers, Hardware, C2 Oarlock, and 4/4 Pitch Bushings.
1/2" Sweep Pin For G5/G6 Carbon Wing - Adjustab...
Note: This assembly is made to order This Assembly Contains: 1/2" Diameter Pin, Spacers, Hardwa...
Note: This assembly is made to order This Assembly Contains: 1/2" Diameter Pin, Spacers, Hardware, C2 Oarlock, and 4/4 Pitch Bushings. This product is designed for use with any G5 and G6 Carbon Wing using the Sill Pin technology.
1/2" Sweep Pin For G5/G6 Carbon Wing - Adjustab...
This product is designed for use with any G5 and G6 Carbon Wing using the Sill Pin technology.
This product is designed for use with any G5 and G6 Carbon Wing using the Sill Pin technology.
1/2" Sweep Pin For G6/G7 Carbon Wing - Slotted...
Note: This assembly is made to order This Assembly Contains: 1/2" Diameter Pin, Spacers, Hardwa...
Note: This assembly is made to order This Assembly Contains: 1/2" Diameter Pin, Spacers, Hardware, C2 Oarlock, and 4/4 Pitch Bushings. This product is designed for the G7 Carbon Wing, however some G6 wings have been outfitted with the Slotted Sill insert to make them compatible with this Pin assembly.
1/2" Sweep Pin For G6/G7 Carbon Wing - Slotted...
This product is designed for the G7 Carbon Wing, however some G6 wings have been outfitted with t...
This product is designed for the G7 Carbon Wing, however some G6 wings have been outfitted with the Slotted Sill insert to make them compatible with this Pin.
1/2" Sweep Pin For G8 Carbon Wing - Complete (x...
Note: This assembly is made to order This Assembly Contains: 1/2" Diameter Pin, Spacers, Hardwa...
Note: This assembly is made to order This Assembly Contains: 1/2" Diameter Pin, Spacers, Hardware, C2 Oarlock, and 4/4 Pitch Bushings.
1/4" Height Clip On Spacer (for 1/2" sweep/scul...
Used on all sweep wings and current "Slotted Sill" aluminum sculling wings
Used on all sweep wings and current "Slotted Sill" aluminum sculling wings
1/4" Height Clip On Spacer (For 7/16" Sculling ...
Used on carbon sculling wings and older aluminum sculling wings with an "Angled Sill" type pin mo...
Used on carbon sculling wings and older aluminum sculling wings with an "Angled Sill" type pin mount.
7/16" Sculling Pin for Aluminum Sculling Wing -...
NOTE: This product is not compatible with current aluminum sculling wing design. Offered only to...
NOTE: This product is not compatible with current aluminum sculling wing design. Offered only to replace legacy parts on used boats. Includes Hardware.
7/16" Sculling Pin For Aluminum Wing - Angled ...
Note: This assembly is made to order. This product is not compatible with current aluminum scull...
Note: This assembly is made to order. This product is not compatible with current aluminum sculling wing design. Offered only to replace legacy parts on used boats. This Assembly Contains: 7/16" Diameter Pin, Spacers, Hardware, C2 Oarlock, and 4/4 Pitch Bushings.
7/16" Sculling Pin For Carbon Sculling Wing - A...
Note: This assembly is made to order This Assembly Contains: 7/16" Diameter Pin, Spacers, Hardwa...
Note: This assembly is made to order This Assembly Contains: 7/16" Diameter Pin, Spacers, Hardware, C2 Oarlock, and 4/4 Pitch Bushings.
Comes in 3 separate heights. Contact us if you don't have riggers being replaced that are stamped...
Comes in 3 separate heights. Contact us if you don't have riggers being replaced that are stamped with info(#2, #2.5, #3) on bottom of wing mount.
BACKORDERED - Pocock Custom Boat Slings (Set of...
Comes with two (2) boat slings. Usable with all hull sizes and types. Stock is completely gone. A...
Comes with two (2) boat slings. Usable with all hull sizes and types. Stock is completely gone. Awaiting shipment of new stock from vendor since Summer 2023. New Pricing TBD
BACKORDERED Bow-Cox Tiller Handle
Long Handles have been phased out as the mold for the K4+ has changed. As such, they are now a s...
Long Handles have been phased out as the mold for the K4+ has changed. As such, they are now a specialty item we are designing a retrofit solution so you can purchase the short handle and still have it function. Call in for more information, or place an order with the understanding that delays should be expected.
BACKORDERED Steering Sandals, on Steering Shoep...
Note: This assembly is made to order Please specify Small (Men's 7-10) or Large (11-15) Refer to ...
Note: This assembly is made to order Please specify Small (Men's 7-10) or Large (11-15) Refer to Pocock Sandals listing for most up-to-date inventory on available sizes. Do not hesitate to contact us for help with the custom order. This Assembly Contains: Pocock Sandals (w/ Steering Screw Adjustment), Steering Shoeplate, Steering Toe Piece (w/Thumb Screw), Cable Housing (Pigtail, Pair), Shoe Mounting Screws (Complete Set)
BACKORDERED Steering Shoeplate
Material: Anodized Aluminum Steering shoeplates only available with current "Euro" mounting screw...
Material: Anodized Aluminum Steering shoeplates only available with current "Euro" mounting screw hole pattern.
BACKORDERED Steering Shoes, on Steering Shoeplate
Note: This assembly is made to order Please specify size, Men's 8-15. Refer to Pocock Rowing Shoe...
Note: This assembly is made to order Please specify size, Men's 8-15. Refer to Pocock Rowing Shoes listing for most up-to-date inventory on available sizes. Do not hesitate to contact us for help with the custom order.
Designed for stainless steel side mount riggers.
Designed for stainless steel side mount riggers.
Bat Quick Release System, Complete
Contains: one pair of dfootstretcher plates, one pair shoe plates, flat head shoe screw set, foot...
Contains: one pair of dfootstretcher plates, one pair shoe plates, flat head shoe screw set, footstretcher plate hardware set. Replacement xVIII Half-Plates available by request. Only compatible with the current xVIII Footstretcher.
