Footstretcher, Complete (Hyperdrive)
Note: This assembly is made to order This Assembly Contains: Toebar, 2x Tube End, Hyperdrive Foo...
Note: This assembly is made to order This Assembly Contains: Toebar, 2x Tube End, Hyperdrive Footboard, Hyperdrive Heel Bracket, 3x T-Bolt, 2x Wing Nut, Center Pin Handle, Toebar/Heel Bracket Hardware (Complete Set), Shoeplate Hardware(Complete Set)
Footstretcher, Complete with Racing Sandals
*** MUST INCLUDE SERIAL NUMBER OF BOAT IN ORDER NOTES ***Please specify Small (Men's 7-10) or Lar...
*** MUST INCLUDE SERIAL NUMBER OF BOAT IN ORDER NOTES ***Please specify Small (Men's 7-10) or Large (11-17).
Footstretcher, Complete with Steering Sandals
*** MUST INCLUDE SERIAL NUMBER OF BOAT IN ORDER NOTES ***
*** MUST INCLUDE SERIAL NUMBER OF BOAT IN ORDER NOTES ***
For Core Model hull footwells with an exposed foam footwell ring (not the carbon rounded edge of ...
For Core Model hull footwells with an exposed foam footwell ring (not the carbon rounded edge of the Hypercarbon series).
G5 Carbon Sweep Wing (Complete)
Note: This assembly is made to order This Assembly Contains: G5 Wing Rigger, 1/2" Pin (w/ hardwa...
Note: This assembly is made to order This Assembly Contains: G5 Wing Rigger, 1/2" Pin (w/ hardware), Sill Pin (w/ hardware), 1/4" Clip On Spacers, C2 Oarlock, Bowbrace (Complete)
G6 Carbon Sweep Wing (Complete)
Note: This assembly is made to order This Assembly Contains: G6 Wing Rigger, 1/2" Pin (w/ hardw...
Note: This assembly is made to order This Assembly Contains: G6 Wing Rigger, 1/2" Pin (w/ hardware), Sill Pin (w/ hardware), 1/4" Clip On Spacers, C2 Oarlock, Bowbrace (Complete)
G7 Carbon Sweep Wing (Complete)
Note: This assembly is made to order This Assembly Contains: G7 Wing Rigger, 1/2" Pin (w/ hardwar...
Note: This assembly is made to order This Assembly Contains: G7 Wing Rigger, 1/2" Pin (w/ hardware), Sill Pin (w/ hardware), 1/4" Clip On Spacers, C2 Oarlock, Bowbrace (Complete)
G7 Carbon Sweep Wing (Wing Only)
G7 Carbon Wing, wing only, must specify port/starboard and size of rigger
G7 Carbon Wing, wing only, must specify port/starboard and size of rigger
G8 Carbon Sweep Wing (Complete)
Note: This assembly is made to order This Assembly Contains: G8 Wing Rigger, 1/2" Pin (w/ hardwar...
Note: This assembly is made to order This Assembly Contains: G8 Wing Rigger, 1/2" Pin (w/ hardware), Pin Cup (w/ hardware), Spread Adjuster Block (w/ hardware), 1/4" Clip On Spacers, C2 Oarlock Product is currently only compatible with the xVIII Small hull (Requires bow-mounted holes drilled in the gunwale).
G8 Carbon Sweep Wing (Wing Only)
Product is currently only compatible with the xVIII Small hull (Requires bow-mounted holes drille...
Product is currently only compatible with the xVIII Small hull (Requires bow-mounted holes drilled in the gunwale).
Two (2) Bolts and Two (2) Lock Washers
Two (2) Bolts and Two (2) Lock Washers
G8 Spread Adjuster Block (w/hardware)
For G8 Carbon Sweep Wing (small xVIII)
For G8 Carbon Sweep Wing (small xVIII)
11.5 inches for Small xVIII hulls. 13 inches for Large xVIII hulls.
11.5 inches for Small xVIII hulls. 13 inches for Large xVIII hulls.
Heel Bracket (Hyperdrive, 37°)
Anodized Aluminum . Requires Hyperdrive Footboard.
Anodized Aluminum . Requires Hyperdrive Footboard.
Heel Bracket, Complete (xVIII Footstretcher Pos...
This Assembly contains: Clip, Clip Mount, 2" T-Bolt, P-Nut Handle, Washer
This Assembly contains: Clip, Clip Mount, 2" T-Bolt, P-Nut Handle, Washer
Footboard Only, no hardware. Requires Hyperdrive Heel Bracket. Intended design is compatible w...
Footboard Only, no hardware. Requires Hyperdrive Heel Bracket. Intended design is compatible with hull size options that take a Small Flat Footboard. THIS EXCLUDES: Large 4's(coxed and coxless), Medium V8's and Large V8's.
Compatible with the bowbrace threaded adjuster. Comes with one each with Right-Hand and Left-Hand...
Compatible with the bowbrace threaded adjuster. Comes with one each with Right-Hand and Left-Hand threading.
This Kit contains the following: 'Outside Mount, Mini' Stainless Steel Bailer w/ gasket pre-insta...
This Kit contains the following: 'Outside Mount, Mini' Stainless Steel Bailer w/ gasket pre-installed, hull cut template, hardware. No written instructions are included in the box. Installation instructions can be found by following the link on the side of the packaging, or by clicking this link here.
Specify Notched (New/Old) or Smooth in the menu. The new Notched Channel Track has a capped end m...
Specify Notched (New/Old) or Smooth in the menu. The new Notched Channel Track has a capped end molded on one side.
MAAS - Classic Aero Rigger Bolt Set
Rigger Bolt Set, Classic Aero - Complete - 1 Sets
Rigger Bolt Set, Classic Aero - Complete - 1 Sets
MAAS - Classic Aero Wing Rigger Adapter Kit
Maas Boat Company is pleased to announce a new adapter to give extended life to the Classic Aero ...
Maas Boat Company is pleased to announce a new adapter to give extended life to the Classic Aero shell. With this adapter, the aluminum wing rigger used on all current Maas shells can be safely mounted on the Classic Aero hull, providing many more years of rowing enjoyment. Kit includes: Pocock extrusion wing rigger complete with pins and oarlocks Fiberglass adapter plate w/fasteners This is a custom order part and may take some time to complete and ship.
